Development of ultra-stable Ni catalysts for CO2 reforming of methane

Carbon deposition behavior in CO₂ reforming of methane, methane decomposition, and CO disproportionation on nickel-magnesia solid solution was investigated by means of thermogravimetric analysis and temperature programmed reaction of deposited carbon with carbon dioxide. It was found that rapid oxidation of CH_x on Ni surface by oxygen species from CO₂ through dissociation at metal-support interface is a key step for the inhibition of carbon formation.     

Multi-component granulation in a fast fluidized bed

The granulation of multi-component particles was conducted in a fast fluidized bed with an atomizing binder solution. The effects of gas velocity and binder droplet diameter on granulation rate, granule size distribution and granule composition were studied. The granulation rate and granule yield were determined by the balance between the agglomeration rate of feed particles and the disintegration rate of granules because there was no secondary granulation. With the increase in gas velocity and the reduction in binder droplet size, the agglomeration rate of feed particles decreased but the disintegration rate of granules increased, resulting in a reduced granule yield. Despite the larger fraction of small particles in the granules, the homogenous granulation of multi-component particles was achieved.     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.     

Structure and properties of poly(vinyl alcohol)/κ‐carrageenan blends

Blends of a commercial atactic poly(vinyl alcohol) (a‐PVA) derived from vinyl acetate and κ‐carrageenan were prepared by mixing the aqueous solutions of both samples. Blend films prepared by casting were transparent. In the DSC curves of the blend films, the endothermic peaks shifted to lower temperature with an increase of the content of κ‐carrageenan. The Young's modulus and the strength at break increased with an increase of the content of a‐PVA. As the standing temperature of the blend solutions decreased, the gelation region increased also at high content of carrageenan. In the amorphous regions of blend films, a‐PVA and κ‐carrageenan were miscible. © 2001 Society of Chemical Industry     

Applying heat integration total site based pinch technology to a large industrial area in Japan to further improve performance of highly efficient process plants

“Area-wide pinch technology” which consists of R-curve analysis and Site Source Sink Profile (SSSP) analysis, was applied to Kashima industrial area, one of the biggest heavy chemical complexes in Japan. This case study demonstrates that despite the very high efficiency of the individual sites in the complex, there is a huge amount of energy saving potential through energy sharing among the various sites. In addition it was found that appropriate use of the available pinch technology tools and techniques allows an industrial area of enormous scale and complexity to be analysed conveniently. This has resulted in practical area-wide energy saving projects being proposed and implemented.     

Zeta potential measurement on the surface of blue-green algae particles for micro-bubble process.

Any kind of blue-green alga produces metabolites of musty substances and toxins. Therefore, it is necessary to remove the blue-green algae, and processing also including nutrient removal is desired for the water quality improvement of eutrophic lakes. The purpose of this study has been to investigate the possibility of a flotation system using a hybrid technique (chemical compounds and electrostatic bridge) applied to raw water containing phytoplankton with high pH of water, and to examine the zeta potential value of phytoplankton surface and the removal efficiency for phytoplankton, ammonia, nitrogen, and phosphoric acid.The results were as follows: firstly, zeta potential of M. aeruginosa particles was observed to achieve charge neutralization on their surface by adhesion of magnesium hydroxide precipitation with increasing pH. Secondly, maximum removal efficiency concerning chlorophyll-a was observed as 84%, and this efficiency was obtained in the condition of pH > 10, and magnesium hydroxide precipitation was observed. Thirdly, in the pH condition that the maximum removal efficiency of chlorophyll-a was obtained, the removal efficiency and the amount of decrease of NH(4)-N and PO(4)-P before and after the change of pH values were observed as 6.7% (0.04 mg-P/L) and 63.6% (0.07 mg-N/L), respectively.     

Geothermal resources of Hachijojima

Hachijojima is a gourd-shaped volcanic island in the Pacific Ocean. Nishiyama and Higashiyama volcanoes consist of basalt lava and associated pyroclastic rocks. A promising geothermal resource was found in south Higashiyama, associated with an uplift of Tertiary rocks consisting of mainly andesite lava and related pyroclastic rocks, overlain by Quaternary volcanic rocks. Steep high-temperature (over 250°C) and high-pressure gradients occur in the deeper portion of the system near the Tertiary–Quaternary contact, indicating the presence of a cap rock. The cap rock formed by deposition of hydrothermal minerals. Geothermal fluid ascends from the deeper portions to shallow depths along vertical fractures through the cap rock. These vertical fractures form the geothermal reservoir in the Tertiary formation. Three wells were drilled into these vertical fractures, and approximately 30 t/h of superheated steam was obtained from each well during flow tests. The geothermal fluid is mainly a mixture of seawater and meteoric water in an approximate ratio of 1 to 2, based on chemical analyses, with a portion of volcanic gas included. At present a 3.3 MW_e, geothermal power plant is being constructed here.